Enerpac Hydraulics

New Enerpac Self-Locking Cube Jack offers 56-ton capacity in a compact, alternative solution to traditional climbing jacks.

SCJ-Series Self-Locking Cube Jack

MILWAUKEE, WI USA – May 28, 2019 – Enerpac, a global market leader in heavy lifting technology and high-pressure hydraulics, announces the SCJ-Series Self-Locking Cube Jack, a new compact and portable hydraulic solution for incremental lifting and lowering of heavy loads. The SCJ-50 Cube Jack uses a base lifting frame and self-aligning, lightweight steel cribbing blocks to provide high-capacity and stabilized lifting–offering a safer, controlled and more efficient alternative to climbing jacks with wooden cribbing.

“The SCJ-50 Cube Jack represents a significant advance in safety, ease-of-use and productivity in compact, portable lifting solutions,” said Peter Crisci, Product Line Director, Enerpac Heavy Lifting Technology. “The incremental system mechanically locks the load as each cribbing block is manually added or removed, instead of being held by hydraulic pressure. Once the mechanical lock engages, the lift cylinder retracts and another cribbing block can be added or removed. This safer, simplified operation sequence can be accomplished with 50 percent fewer cycles than climbing jacks, yielding a substantial increase in productivity as well,” Crisci noted.

The SCJ-50 Cube Jack is based on an operating principle similar to Enerpac’s proven 125-750 ton Jack-Up Systems, but in a vastly smaller footprint and without the need for electrical controls. Up to eleven 35-lb. (16kg) steel cribbing blocks can be safely and easily stacked onto the compact Cube Jack base frame yielding a maximum height of 79 inches (2m). The base frame footprint measures just 19.8-in. x 16.9-in (502mm x 430mm), making it ideal for portability and restricted operating space. A low 19.4-in. (494mm) minimum initial jacking height increases flexibility and reduces operational startup time.

The SCJ-50 Cube Jack operates with standard 10,000 psi (700 bar) hydraulic pressure and is compatible with standard Enerpac pumps, such as the Split-Flow Pump that offers the ability to synchronously operate multiple Cube Jacks.

Crisci added that the compact size and portability of the Self-Locking Cube Jack offers a powerful solution for numerous applications, such as equipment maintenance, vehicle unloading or jacking a transformer, module, or bridge.

To learn more about the new SCJ-50 Self-Locking Cube Jack and find your local Enerpac distributor, visit the company’s website www.Enerpac.com

About Enerpac
With legacy that spans over a century and a 60-year history providing industrial solutions, Enerpac is a global market leader in high-pressure hydraulic tools, controlled force products and innovative solutions for precise positioning of heavy loads. From the smallest hydraulic cylinders to complete computer-operated lifting and positioning systems, Enerpac products are available worldwide through a network of 1,400 distributor partners. With 28 facilities in 22 countries, Enerpac offers unsurpassed technical support and hydraulic expertise, industry-leading products and engineered solutions to meet the world’s most monumental lifting and positioning challenges.